One HD Video Input to Four HD Video Outputs

This product has been superseded by the Gefen EXT-HDMI-144

The 1:4 HD Splitter splits one high definition video signal and distributes it to up to four high definition displays at the same time. It enhances home theater and other high definition video environments by allowing one incoming source signal to be viewed on multiple displays at the same time.

Sharp and highly defined video is supported in multiple resolutions up to 1080p. The 1:4 HD Splitter works with satellite set-top boxes, Blu-Ray players, and other HDTV devices equipped with DVI output as well as high definition televisions and displays equipped with a DVI input. To use with HDMI (high definition multimedia interface) sources or displays, Gefen supplies DVI to HDMI™ Cables and Adapters. The 1:4 HD Splitter used with HDMI sources or displays will NOT support audio.

How It Works

The 1:4 HD Splitter is a distribution hub that sends the same video to up to four high definition televisions. You simply connect your source to the 1:4 HD Splitter's input using the supplied cable. Up to four high definition displays are connected to the Splitter's outputs. DVI output 1 is the primary connection and is used for the main display. DVI outputs 2, 3 and 4 follow the main display.

The 1:4 HD Splitter will ONLY support digital video signals. We suggest you use the 1:2 HDMI Splitter or 1:4 HD Digital Audio Splitter to distribute digital video and audio.

Note:  The 1:4 HD Splitter is HDCP compliant.

All displays that cannot show the same video resolution(s) as the Primary Display connected to Output #1 may fail to show a picture. Secondary displays follow the Primary by sharing the resolution and capability information (EDID) obtained from the Primary Display.

Features:

• Flexible solution that sends HDTV to multiple displays at the same time
• Connects up to four HDTV displays at the same time to the same video source
• Allows simultaneous video display at local and remote locations
• Supports 480P, 720P, 1080I and 1080P resolutions
• Supports HDCP compliant devices

Specifications:

• Video Amplifier Bandwidth: 165 MHz
• Single Link Range: up to 1080P
• Vertical Frequency Range: 50 - 85 Hz
• Video Input Connector: HDMI 19-pin Type A
• Video Output Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
• Power Consumption: 15 watts (max.)
• Power Supply: 5VDC
• Dimensions: 9"W x 1"H x 5"D
• Shipping Weight: 5 Lbs.

Package Includes:

• 1:4 HD Splitter
• One 5v power supply
• One 6ft HDMI cable

Product Options:

Choose input cable type:
• HDMI to HDMI Cable (m-m)
• DVI to HDMI Cable (m-m)