User Application:The de-embedder allows the user to extract audio to be monitored,
recorded, or broadcasted from an SDI audio/video stream. During a live broadcast,
the de-embedder can be used to extract audio from the SDI feed to master before it
goes out to broadcast.
Audio DeEmbedder for 3GSDI stream removes and routes audio data from any SDI source to any four AES/EBU audio outputs
This product has been discontinued.
The GefenPRO 3GSDI Audio De-Embedder extracts audio from 3GSDI, Single-Link HDSDI, EDSDI, and SDI video signals. Up to four AES/EBU digital audio streams can be de-embedded and routed to any of the four audio outputs. Selection and routing of each audio group or pair can be configured via RS-232.
How It Works
Connect an SDI source to the SDI In connector. Connect the SDI Loop Out connector to an SDI audio/video device to monitor the original unmodified signal. Connect the Output connector to an SDI acceptor (such as video broadcastequipment). Connect up to four AES/EBU digital audio reproduction devices (such as a DAT recorder or pre-amp) to the Audio Out connectors. Connect the RS-232 cable from the Audio De-Embedder to a PC or automation system to control which audio group or pair will be de-embedded from the video signal. Connect the AC power cord to the 3GSDI Audio De-Embedder and to an available electrical outlet. Once the unit is powered, RS-232 commands can be used to select the audio group and pair to be de-embedded from the video signal.
GefenPRO supports demanding professionals with invaluable equipment for commercial and broadcast environments. With its expanded hardware, internal power supplies, robust rack mountable enclosures, and 2 year warranty with 24/7 customer support, the GefenPRO Modular Matrix will always perform in the most technically challenging environments.
Dual-Link HDSDI(SMPTE 372M)
525i / 720p / 1080i @ 59.94Hz
1080p @ 23.98Hz>
625i / 720p / 1080i @ 50Hz
1080p @ 24Hz
1080i / 720p @ 60Hz
1080p @ 60Hz
Allows individual digital audio channels to be re-arranged on the output
Audio delay adjustment for each pair of audio outputs (0 - 150 ms)
LED Status Indicators
RS-232 Control for automation
USB port for upgrading firmware
Rack mountable (rack ears included)
Internal power supply with detachable IEC AC cord
Back panel master power switch
SDI (SMPTE 259M)
EDSDI (SMPTE 344M)
Single-Link HDSDI (SMPTE 292M)
3GSDI (SMPTE 424M)
SDI Input Connector: (1) BNC, female
SDI Loop Out Connector: (1) BNC, female
SDI Output Connector: (1) BNC, female
Digital Audio Output Connectors: (4) BNC, female
RS-232 Connector: (1) DB-9, female
Power On Indicator: (1) LED, blue
3G-SDI Indicator: (1) LED, blue
Audio De-embedder Indicator: (1) LED, blue
SDI/HD-SDI Signal Indicator: (1) LED, bi-color (red/green)
AC Power Connector: (1) IEC type
Power Supply: 100 - 240V AC (Internal)
Dimensions (W x H x D): 16.8" x 1.75" x 7" (428mm x 44.5mm x 178mm)