Gefen, LLC - 1:5 Splitter for HDMI 1.3

Manual

One Sheet

Closer Look

In The Box

Diagram

Send HDMI 1.3 Video to up to 5 HDMI Displays

The Gefen 1:5 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu-ray players and other HDTV devices with HDMI outputs to be connected to up to five HDTV displays (or more if multiple splitters are utilized in place of HDTV displays).

How It Works

The 1:5 HDMI 1.3 Splitter is a distribution hub that sends the same HDMI signals to up to five HDTV digital displays. You simply connect your HDMI video source to the 1:5 HDMI 1.3 Splitters HDMI input jack, then connect your HDMI-compatible displays to each of the HDMI outputs. Power-cycle all equipment and you should see beautiful, sharp HDMI video on all of your HDMI displays.

Note: This device is fully HDCP Compliant.

Output 1 is connected to the Primary Display, from which the resolution and device capability information (EDID) is obtained. All other displays on the other outputs must be capable of the same resolution(s) being shown on the Primary Display, or they may not show a picture.

HDMI 1.3 Features:

Lip-Sync Pass Through
225 MHz (up to 12 bit YUV 444 supported @ 1080p)
Deep Color Supported (XV Color Supported)
Color Space Conversion Supported
Dolby TrueHD & DTS Master Supported
CEC Pass Through

Features

Connects up to five HDMI / DVI displays from one HDMI source
Optionally add more displays by connecting splitters
Easily attains resolutions up to 1080p, 2k, and 1920 x 1200
HDMI and HDCP compliant

Specifications

Video Amplifier Bandwidth: 225 MHz
Input Video Signal: 1.2 Volts p-p
Input DDC Signal: 5 Volts p-p (TTL)
Single Link Range: 1080p/1920 x 1200 maximum
HDMI Connector: Type A, 19-pin female
Power Consumption: 60W (max)
Dimensions: 17.1" W x 1.7" H x 5.2" D
Shipping Weight: 6 lbs.

Optional Accessories show