Extenders >> HDMI Extenders >> Extender for HDMI over RGB (Discontinued)




Extend HDMI at 1080p over Coax with support for HDMI 1.3

This product has been discontinued.

The Gefen HDMI over RGB Extender is the ideal solution for environments that have existing RGBHV infrastructure but would like to take advantage of the benefits of HDMI. This product is capable of extending HDMI 1.3 with 3DTV support up to 330 feet (100 meters) away from the source component(s). This product also provides an IR backchannel for relaying IR commands from the display back to the location of the source component(s).








How It Works


The Sender unit is connected to the HDMI source with the included 6 foot HDMI cable, and the Receiver unit is connected to the HDMI display with a user supplied cable. The 4 or 5 BNC terminated coaxial cables of up to 330 feet in length connect between the Sender and Receiver units. The Sender is powered by the included 5V power supply, and the Receiver is powered over the coaxial cables, or by an optional 5V power supply if only 4 coaxial cables are available.

Gefen offers optional IR accessories that allow one to conceal the Receiver unit near the display and relay IR control signals back to the location of the source components over the existing coaxial cables. For more information please refer to the "Optional Accessories" section on the left-hand side of this page. Note:  

HDMI Features Supported:

  • Lip-Sync Pass Through
  • 340 MHz (up to 16 bit YUV 444 supported @ 1080p)
  • Deep Color
  • x.v.Color
  • Dolby TrueHD & DTS Master Audio
  • 3DTV Pass-Through
  • CEC Protocol Pass Through


  • Supports LPCM 7.1 audio, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio
  • IR extension (Receiver to Sender only)
  • Receiver features IR window and 3.5mm jack for optional IR receiver
  • Locking Power Supplies (required for Sender only with five coaxial cables)
  • HDCP pass-through
  • Supports resolutions of up to 1080p Full HD and 1920 x 1200
  • Extends HDMI up to 330 feet (100 meters) over five coaxial cables
  • Can also be used with only four coaxial cables with an addional power supply
  • Maximum Pixel Clock: 340 MHz
  • Video Input Connector (Sender): (1) HDMI Type A 19-pin female
  • Video Output Connector (Receiver): (1) HDMI Type A 19-pin female
  • Link Connectors (Sender/Receiver): (5) 75Ω BNC, female
  • IR Emitter Port (Sender): (1) 3.5mm mini-mono jack
  • IR Extender Port (Receiver): (1) 3.5mm mini-stereo jack
  • Power Supply: 5V DC, Locking (one included; second power supply optional for 4 BNC use)
  • Power Consumption: 10W (max.) each
  • Dimensions (Sender/Receiver): 4.25" W x 3.9" D x 1.25" H
  • Shipping Weight: 3 lbs.

Optional Accessories  show


Purchase Options





UPC:   845344033815




HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.