Gefen, LLC - DVI Audio Extender

Manual

One Sheet

Closer Look

In The Box

Diagram

Extends DVI and digital/analog audio up to 200 feet (60 meters) over two CAT-5 cables.

Our DVI Audio Extender extends your DVI and digital/analog audio up to 200 feet away from your HDTV DVI or HDMI™ source using cost effective CAT-5 cables.

How It Works

The DVI Audio Extender sender unit sits next to your video source such as computer, DVD player or any set-top box. The cables supplied with the DVI Audio Extender connect your video source/audio source to the sender. Your display/audio receiver plugs into the back of the DVI Audio Extender receiver. Two CAT-5 cables* connect the sender and the receiver units to each other.

Note: The DVI Audio Extender is HDCP compliant.

DVI, HDCP & HDMI Defined

* NOTE: A shielded CAT-5e or CAT-6 cable for DDC is recommended for optimal video quality. The video CAT-5 cable does not need to be shielded.

Features

Extends any DVI & Digital or Analog Audio compliant device up to 200 feet from the computer
Uses CAT-5e cable for DDC and control signals
Supports Digital 8.1(DTS, Dolby Digital, etc.)
Audio and video are transmitted digitally over the CAT-5e cable for zero signal loss
Supports resolutions up to 1080p, 2K, and 1920 x 1200
Supports DDWG standard for DVI compliant monitors
HDCP compliant

Specifications

Maximum Pixel Clock: 165 MHz
Digital Audio Input/Output: S/PDIF (Digital Coax), Optical TOSlink
Analog Audio Input/Output: RCA Left and Right
S/PDIF (Digital Coax): 96 kHz Performance
Video Amplifier Bandwidth: 165 MHz
Single Link Range:1080P/1920 x 1200
Input Video Signal:1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Input/Output DVI Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
Link Connector: RJ-45
Power Supply: (2) 5Vdc Power Supplies / 10W each power consumption (max)
Dimensions: 3.3"D x 5.5"W x 1"H
Shipping Weight: 5 Lbs.

Optional Accessories show