View CartExtenders >>
DVI Extender >> DVI•1600HD
|
Extend DVI/HDMI with audio and RS232 over mulit-mode or single mode fiber optic cable up to 6600 feet (2 kilometers)
The Gefen DVI-1600HD extends digital signage applications over fiber optic cable up to 2 kilometers. The DVI-1600HD extends DVI or HDMI plus audio in addition to RS-232 for control or touch-panel systems. This unit maintains computer resolutions up to 1920x1200 and 1080p Full HD.
Click here for DVI-1600HD fiber kits.
Click here for DVI-1600HD fiber kits.
How It Works
Use the supplied DVI cable to connect the Sender Unit to the DVI source. Place the Receiver Unit next to the DVI display and connect a DVI cable between the display and the Receiver Unit. Use four LC-LC fiber cables to connect the Sender Unit to the Receiver Unit. Connect the audio source to the Sender Unit (either digital audio or analog). Connect the audio output from the Receiver Unit unit to an A/V receiver. Connect the included 12V DC power supplies to both the Sender Unit and the Receiver Unit then plug the power supplies to available electrical outlets.
Note: This product fully supports HDCP content when the front panel switch on the Sender Unit is set to HDMI.
Note: This product fully supports HDCP content when the front panel switch on the Sender Unit is set to HDMI.
Features
- Extends any DVI device without HDCP up to 6,600 feet (2000 meters) over single-mode fiber
- Extends any DVI device without HDCP up to 1,640 feet (500 meters) over multi-mode fiber
- Extends any HDMI device with DDC/HDCP up to 660 feet (200 meters) over single-mode or multi-mode fiber, using DVI to HDMI adapters or cables (no audio)
- Supports resolutions up to 1920 x 1200
- Plug-and-Play installation requires no software drivers
- Can use either single-mode or multi-mode optical fiber cables
- Extends L/R analog audio, S/PDIF, or TOSLINK digital audio (switch-selectable)
- RS-232 signal extension helps create long-distance control systems for A/V integration
Specifications
- Max. Pixel Clock: 165MHz
- Input Video Signal: 1.2V p-p
- Input DDC Signal: 5V p-p (TTL)
- Video Input Connector (Sender): (1) DVI-I 29-pin, female (digital only)
- Video Output Connector (Receiver): (1) DVI-I 29-pin, female (digital only)
- Audio Input Connectors (Sender): (1) S/PDIF (RCA female), (1) TOSLINK, (1) L/R analog audio (2 x RCA, female)
- RS-232 Input Connector (Sender): (1) DB-9, female
- Audio Output Connectors (Receiver): (1) S/PDIF (RCA female), (1) TOSLINK, (1) L/R analog audio (2 x RCA, female)
- RS-232 Output Connector (Receiver): (1) DB-9, male
- Link Connectors (Sender/Receiver): (4) Type LC fiber connectors (2 x LC Duplex)
- Fiber Type: single-mode or multi-mode (limited distance over multi-mode)
- Fiber Cable: CAB-LC-XXX (62.5μ multi-mode)
- Power Supplies (Sender / Receiver): 12V DC, Locking
- Power Consumption: 36W (max.) each
- Operating Temperature: 0 - 50 C
- Dimensions (Sender / Receiver): 10.3" W x 5.1" D x 1.6" H
- Shipping Weight: 6 lbs.
Fiber Kits show
Optional Accessories show
Related Products show
